The importance of the price of men worries about the representatives of sex more powerful since ancient times.Confirmation of this is an artificial member found, according to historians, at least 28,000 years old.It was discovered in archaeological excavations in Germany - a country that was considered a pioneer and a leader in the porn industry.
Today, to change the size of the penis is possible in different methods - from the use of special drugs, the use of ointment and cream, performing prolonged massage, surgery.However, the nozzle for the genital organs can be purchased even in toys for intimacy and doing it with your own hands, becoming popular.
Can you create a member nozzle?
The Internet has all the requirements "How to create an artificial rooster with your own hand."Increased interest is simply explained: Models are presented in very quality and expensive stores, and low -cost models are not different in high quality.Want to try a sex toy, a problem that has been born: Is it necessary to pay for the goods without the confidence in using more?
In the end, it can be shown that the girl will not approve the presence of the tap or she will cause her discomfort, stimulation or pain (later not excluded for men).If you choose a more affordable option, there is a risk of stimulation due to allergic reactions that may occur with toys or genital trauma due to broken or exfoliating parts of the nozzle.
It is also possible that when you want to try here and now, but there's no time to wait for an order from the Internet, and there is no way to visit the nearest sex store.In such situations, the question of how to make a dildo or a member nozzle at home is quite suitable.
If you look at the product, it is clear that it is quite difficult to build it, but it is not impossible.The main thing is a desire and a small source of time, as well as buying the necessary materials.After that, the final quality of the object will depend on the object.The advantage of a homemade member is that its shape and size will be exclusively limited by the author's imagination.
The choice of suitable materials
For nozzles and artificial members produced in industrial conditions, use:
- Cybercro is a material similar to a person's genuine skin.It is soft, sophisticated, in reality that cannot be distinguished from raw meat, because when touching the body, it quickly takes the temperature and holds it during the time to stay on the organ.The downside of the material is very susceptible to damage, so it requires careful treatment, washing in warm soap, stored in a special case.
- Polyvinyl chloride is the most common material for the production of dildo and sex toys.Its advantage: The ability to quickly be in the form of the human body, the strength and the combination of lubricants.It is washed with PVC with soft detergents: soap, shower gel or intimate hygiene, without special storage conditions.Application is possible with any frequency and intensity.
- Silicone is a medical material used to produce intimate goods in 90% of cases.It is soft, flexible and quite elastic.It can quickly get the shape of the body, and after "work" to return to its original state.Advantages: Non -allergens allows the operation of all toys with any intensity.Storing nozzle from silicone in a dark place, because under the influence of ultraviolet rays, it is destroyed.Disadvantages - Games with it requires lubrication, and only based on water.
- Rubber is a specialized material with thermoplastic properties and comfortable to touch.Suitable for creating products that need to be supplied and maintained.The softness of the material allows them to make them comfortable for both partners and elasticity - to get the necessary parameters (length, thickness, ribs, pimples, etc.).The nozzle on a member of the rubber does not rub and does not cause an allergic reaction.For care, detergent is not capable or special detergent for intimate toys used.
- The plastic is a dense material in which the special mixture is added to softness and elasticity.Used to produce nozzles of special shapes.
The choice of the material is the most important stage in producing a dildo with your own hands, because the final version of the product and its safety for the health of both partners depends on this.Therefore, saving in this case is extremely unwanted.
Materials
Before making phallus at home, you should clarify which materials of these are available for the manufacturer.Some of them are available in free sale in construction stores, others when ordering via the Internet.
Therefore, to produce home gravity, they are suitable:
- The volume of alginate casting;
- Silicon casting mass;
- Bend Polyurethane mass.
Perhaps other options will be provided in the store, but before you get them, you should find out whether the material causes an allergic reaction or not and the level of safety for the body.
Work phase
How to make a dildo at home?It will be required:
- Flexible transparent plastic;
- Tape (adhesive tape);
- materials selected;
- Food movie.
A square or rectangle is cut off the plastic sheet - depending on the size of the product planned.The length of the sheet is prescribed as desired - the more the man wants to add to himself, the longer it is.The width of the sheet depends on the existing parameters of the penis: in an erection state, it will easily go inside and have empty space.To create a homemade member to suit the size, it must be:
- Measure it with a centimeter ribbon;
- Add centimeters suitable to the results;
- Cut the desired width.
Error: To wrap plastic sheets around the penis and cut off with eyes - a phallus made by yourself will be small or too large.
When it is completed with the size and cutting, the plate is rotated by a tube, the joint of the edges is fixed tightly to the tape.A circle is cut out of the plastic, closed one of the holes and is also tightly wrapped with tape.The task is to make the pipeline completely strict.
The second phase of the process of making a dildo is falling.For this, an erection penis is tightly wrapped in the film to eliminate the contact of the body with the body.If the task is to create a smooth nozzle, you need to wrap it carefully, not including all abnormalities that may occur, because the smoothness of the future nozzle will depend on this.
Next, the casting block is poured into the prepared tube and the penis is lowered there.The average solid process lasts 15 minutes, then the structure is removed from the penis.Now you can carefully remove the tape and release the product from the plastic frame - a home phallus is ready to use.
If he wants to offer anatomical shape for toys, this can be done using a knife and abrasive material.They are very easy to create different edges, ribs, antennas and other chips of the nozzles.
Risk
Before creating a member with your own hands from improvised materials, you need to take into account the serious health risks inherent in toys at home for sex:
- Seals, sides, corners, corners, protruding parts and other defects in toys at home can cause injury to the genitals of both partners;
- Inaccurate calculation size threatens loss of tap in the process of intimacy;A more serious choice - it can be trapped in a woman's body;
- If the calculations are done in an incomplete or lost erection state at a time of solidification, there is a risk that will not be effective to remove the nozzle without medical care;
- Violating the tightness when wrapping one member with a film can cause mass in the urethra, which will cause an inflammatory or obstruction of the urethra;
- To keep a member of an erection completely in 15 minutes is a difficult task for the solution in which men take drugs with phosphodesterase inhibitors with serious side effects for internal organs.
Has evaluated and considered all possible risks, they are suitable for independent production of dildos and responsible and careful nozzles, and all stages are carefully and accurately performed.
What to create an artificial phallus
It is easier to make a Phalloimitator directly at home, ie artificial members.Such toys are more suitable for women, and if the girl wants, it can be free to own.For the production of dumplings, they are suitable:
Plaster
It is sold freely in a supermarket, pharmacy or children's toy store.Prepare mass (rules to work with plaster described in the instructions embedded in the package), a member of the desired size, it is allowed to completely dry.After it is treated with sandpaper to remove all collisions.Before the love games, a condom was placed on Phallus.
The use of plastic plaster mixture may also be for the production of nozzles: Because of this, a member is completely erected and wrapped in a film covered with plaster mixture and let it hard.However, such a toy will be very rigid, and this property causes discomfort, pain and inconvenience.Its second drawback is fragile.
Silicone mixture
Another option to fill it has a shape from the previous vibrator.That is, if the toy has been purchased (or the packaging from it accidentally received from friends), the silicon block can be poured into a plastic shape, previously lubricated with vegetable oil for free exploitation at the end of work and after stabbing, half glue with glue.
The glue is likely to cause the most powerful allergy, so games with such a artificial member are only recommended for rubber products No. 2.
Wax
This document is available in 90% of cases and everywhere, while it has the advantage:
- Easy to have the desired shape;
- There is a characteristic aroma;
- In the absence of an allergy to flying, it is allowed to bring a woman into the body without a condom (it is enough to treat with fat).
Wax candles heat up, it is given the necessary dimensions of length and width, if desired, the edges stimulate additional, thorns, ribs, etc.
Plastic
This product for children's creativity can be used in the same way as wax, but it is worth considering that it has more plastic, and therefore, it can easily lose the shape between sex.A simple pencil is capable of making a more stable toy, placed inside a matte or frozen artificial member of Phallus.
Improvisation
You can make your own penis, but this process is not fast.If the desire of experiments arises suddenly, and there is no special toy in your hand, you can use improvised means.How can you replace a member?
- Vegetables and fruits.In almost every refrigerator, there are gifts of nature shaped of a phallic symbol.An ideal and affordable option - cucumber and bananas, in the form of chilling will bring their passion into intimate games.
- Cellular phone.We are talking about small models that can be put into vibration.
- Electric shaver.A previous cut was removed from her.
The alternative solution will serve as a comb with a long and wide pen, curved curls and other things with a phallic shape with no angle and protruding part.Main conditions for their application: Wash in water and place condoms on them.
Bed games with nozzles, artificial members and lubricants are called to create a variety and sensitivity into the couple's daily life.However, before replacing a member with an artificial copy, it is worth coordinating this issue with a lover, otherwise a romantic evening can end sadly: a serious argument or painful rest.